(502) 804-2425

Swing Arm Operators

A top Swing Arm Operators is the most common type used for homes and businesses. It’s not uncommon for these types of openers to last for many years. The benefit of these types of openers is their aesthetic appeal; they’re not much to look at because they are large and highly visible which look pretty decent . These types of gates can be programmed using any type of automatic Swing Arm Operators.

Protective

Hydraulic Swing Arm Operators are more expensive, but very durable and able to move gates weighing 2,200 pounds or more. These units work on the hydraulic premise, but don’t use limit switches. Gate Operators that operate hydraulically have mechanical positive stops, which are used to open and close the gate and keep them in position. These models are typically not recommended for solar installation by Swing Arm Operators due to the requirement of a hydraulic pump that must run on VAC power.

Swing Arm Operators

Swing Arm Operators

The Model operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these Swing Arm Operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The models can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

The Swing Arm Operators offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. The elegant lines obtained by using extruded aluminum material provide a clean profile that will blend in with any gate design. But beauty is not just skin deep with the Swing Arm Operators. The powerful screw driven piston connects directly to the gate eliminating weak mechanical connections and it is fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads.

Eliminates Risks

And there is no need to worry about hydraulic leaks, check valves or pumps. These Swing Arm Operators feature built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class, and is available in a standard and deluxe housing. The deluxe housing provides three 120 VAC convenience outlets to power additional auxiliary device transformers (for telephone entry systems, for example). Both come standard with built-in battery back-up installed.

Most Swing Arm Operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Swing Arm Operators installs underground making it virtually invisible and satisfies the most sophisticated automation needs without being detrimental to the original gate design. Invisible and powerful, the motor/drive mechanism is constructed in die-cast aluminum with a special corrosion-proof treatment, and because the drive unit is gear driven, there is no need to worry about hydraulic leaks and hinge, check valves or pumps. The underground self-supporting foundation box is built from corrosion-proof steel and has a galvanized steel cover.

Contact Us

A lockable manual release lever is designed so that it can be operated from inside or outside the gate. The features of models built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class, and with a 24 volt DC operating voltage, choose what is ideal for residential applications.Swing Arm Operators offers a great selection of gate openers, custom driveway gates, tele-entry systems, and much more.

Look here to know in depth about Swing Gate.

Related Tags:

Steel Driveway Gates.Overhead Operators,Slide Gate,Solar Gate Operators